Click here to Download Complete GATE 2016 Chemical Engineering Exam Solutions in .pdf format.
Watch GATE 2016 Analysis videos by The Gate Coach Faculty:
by ~ Ankush Gupta
by ~ Ankur Bansal
Click here to Download Complete GATE 2016 Chemical Engineering Exam Solutions in .pdf format.
Watch GATE 2016 Analysis videos by The Gate Coach Faculty:
by ~ Ankush Gupta
by ~ Ankur Bansal
now the questions are available so please give us all the solutions ..
LikeLike
Yes we are working on it …
LikeLike
Can plz know when is your institute posting the complete solutions ?
LikeLike
TODAY ITSELF
LikeLike
Your answer for horizontal plate natural convetion is wrong. It will be 26 w/m2.
I should justify
LikeLike
We are sure that our answer is correct, if you are having any doubt than Send your solution to us, we will find out, where you are making mistakes.
LikeLike
so what is the answer for horizantal plate heat flux answer 26 or 39
LikeLike
In time period Question they mentioned T in minutes but in your solution you considered as sec but all of us cal caluclated in min and answered accordingly 15.9 min i.e, 954 sec we answered differently nearest 100 sec could you please help us in this to take IISC consideration for bonus or compensation.
LikeLike
What is the final answer 26 or 39? in heat flux question
LikeLike
WHAT WILL BE MY RANK IN GATE CHEMICAL 2016 IF I SCORE 46%?
LikeLike
I am having doubt in question No. 49 . It is obvious that reaction rate is high but diffusion rate is low. So when reactant molecules or gas is going into the pores of the catalyst , it is going to react very fast on the surface even though diffusion is negligible or low. so only immediate vicinity of external surface of the pellet will be used. Which leads to scenario no. 2 to be valid.
In question no. 38 why can’t we just equal both the head loss of the pipe and the head provided by the pump and get the flow rate??
thanks in advance you guys have been very cooperative.
LikeLike
yes, the answer will obviously be scenario 2. i think, gate coach should think about it again and correct the solution.
LikeLike
What is the answer for head-capacity question..?valu of Q..?
LikeLike
In case of lower plate temperature cold the system don’t have any natural convection. Only conduction heat transfer will be there so 26 should be answer because conductivity is constant.
LikeLike
In case of lower plate temperature cold the system don’t have any natural convection. Only conduction will be there so 26 should be answer as conductivity is constant
LikeLike
what will be my rank and gate score if i got 46% marks in gate 2016 chemical engineering?
LikeLike
what will be my rank if i get 60 marks gate 2016
LikeLike
what will be my rank if i get 60 marks in gate 2016
LikeLike
Please fill the Gate Rank Predictor form… To k ow more …
LikeLike
Sir, in the numerical type questions is it necessary to write 0 before decimal . In the instruction no information is mentioned regarding it.
LikeLike
like 0.25 and .25 will be considerd same or not.
LikeLike
In instructions it was mentioned that you can type 0.25 or .25
LikeLike
Sir can you please tell how you have calculated the value of heat flux fpr flat plate of 39….as no solution is given only answer is there?
LikeLike
If you consider 1 and 3 rd case for flat plate there is am increase of flux by+3 w/m2 while for case 1 and 2 there was a drop of 13 w/m2 for case 2 from case 1 ….then how could this is possible that for case 4 drop is only -3 w/m2 in comparison to case 3. if you see the temperature difference in all thw cases is same and i you calculate the thermal conductivity value for case 1, 2 and 3 are 1.3, 0.867 and 1.4 so how will you calculate value of heat flux as 39?
LikeLike
sir ab to answer bhi aagaye hai ab to answers correct kar lo.
LikeLike
Respected sir, could you please explain the solution to the questions no. 38 and 41 in GATE 2016 CH ?
LikeLike
Sir, could you please explain the solution to question no. 38 and 41 for GATE 2016 CH?
LikeLike